About
Weicon High-performance Assembly Pastes and Sprays
|
 |
|
All kinds of influencing factors, such as moisture and friction, lead to damage due to corrosion, seizure, and wear on machines and installations. Extensive repair and maintenance work at considerable cost are the result.
Especially under critical conditions of application, such as:
• High operation temperatures
• High pressure loads
• Outdoor weather conditions
• Aggressive chemicals
• The influence of other media
such consequences frequently occur.
The safe protection of work pieces and structures made of steel and other metals is thus absolutely necessary for the rational and economic operation of technical installations.
WEICON Anti-Seize assembly pastes are especially developed for these requirements. They are used as protecting and separating agents, as well as lubricants, for highly stressed parts, especially at high temperatures. Optimally balanced solids contents as well as selected additives permit a wide range of applications, especially in this area.
Conventional separating agents or lubricants such as mineral oils and greases often cannot provide sufficient lubrication and protection in difficult industrial environments.
The basic components in WEICON Anti-Seize are made of synthetic oils, which have a considerably lower sulphur content than products containing mineral oil. A residuefree vaporisation of the oil at temperatures between +200°C and +250°C is thus possible. This is particularly important in the case of stainless steels (e.g. for VA material) to prevent stress-corrosion cracking.
Due to the special formulation and the very fine grinding of the solids contained in WEICON Anti-Seize, irregularities in the surface being protected are completely filled – even to a layer thickness of only 12 µm. Only a perfectly sealed surface guarantees a reliable protection against corrosion. An additional sealing effect thus results for special applications, such as flange connections.
WEICON Anti-Seize provides protection against the following:
• Corrosion – seizure - wear
• Stick-slip phenomena
• Oxidation and fretting corrosion
• Electrolytic reactions (“cold welding”)
WEICON Anti-Seize is free of sulphurous additives and halogens, well-adherent and abrasion-proof, and resistant against hot, cold, and salt water. The extremely low friction coefficient also permits easy disassembly from machines and installations.
In addition, WEICON Anti-Seize assembly pastes are excellent lubricants for statically high-stressed parts and for slowly rotating installations, as long as corresponding relubrication intervals are observed.
With its dual function as a lubricant and corrosion protection agent, WEICON Anti-Seize thus becomes a rationalisation factor, both in terms of saving time and reducing costs.
WEICON Anti-Seize is used sparingly. At a layer thickness of 0,01 mm, 1 kg suffices to cover a surface area of approximately 45 m².
|
